![]() ![]() Issue the show running-config command on the router CLI in order to verify this. Make sure that you use the read-write string configured on your router. Private-SNMP read-write community string. In all the examples that this document shows, these values are used for illustration purposes:ġ71.68.191.135-IP address of the TFTP server. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. ![]() The information in this document was created from the devices in a specific lab environment. Cisco recommends that you use a more recent release of Cisco IOS software such as Cisco IOS Software Release 12.0. This tutorial is based around the sample application, CICSDB2, used in the WinRunner 2000 and TouchPoint tutorials.It is therefore assumed that you have already completed those tutorials and that you have created a Mainframe Express project for CICSDB2 as described in those chapters. The MIBs that these examples use are OLD-CISCO-SYS-MIB and OLD-CISCO-FLASH-MIB, which are supported in Cisco IOS Software Release 10.2 and later. Chapter 31: Using WinRunner 2000 and TouchPoint Together. The information in this document is based Cisco IOS Software Release 10.2 or later. ![]() Expo QA 2016 Automation and Performance (with Mobile Center integration) responsible, carring out presentations and being part of company's image. Readers of this document should be knowledgeable of SNMP and MIBs. Scripting, scenarios execution, analysis, profiling (HP Diagnostics). This document describes how to move configuration files and Cisco IOS® images between a router and a Trivial File Transfer Protocol (TFTP) server with the use of Simple Network Management Protocol (SNMP). Appendix A - MIB Object Details Introduction ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |